RMS Technologies R101 DRIVER/INDEXER User Manual
Page 2
RMS Technologies
Page 2
Version 1.31
R101 Single Axis Driver/Indexer Manual
10/1/2007
Thank you for purchasing the R101 Single-Axis Driver/Indexer. This product is
warranted to be free of manufacturing defects for one (1) year from the date of
purchase.
Technical Support for RMS Technologies
By Telephone: 877-301-3609
(Mon.-Fri., 8:00 a.m.-5:00 p.m.)
On the Web:
www.rmsmotion.com
Via Email:
PLEASE READ BEFORE USING
Before you start, you must have a suitable step motor, a DC power supply suitable
for the motor and a current resistor. The power supply voltage must be between 4
times and 20 times the motor's rated voltage. The current set resistor may be a ¼
Watt, 5% part.
DISCLAIMER
The information provided in this document is believed to be reliable. However, no
responsibility is assumed for any possible inaccuracies or omissions. Specifications
are subject to change without notice.
RMS Technologies reserves the right to make changes without further notice to any
products herein to improve reliability, function, or design. RMS Technologies does
not assume any liability arising out of the application or use of any product or circuit
described herein; neither does it convey any license under its patent rights, nor the
rights of others
R101 User Manual