Team Associated SC10GT - Manual (Page 27)

27
:: Shocks Build (cont.) - Bag G
:: Wheel and Tire Assembly
Build 2 Rear!
Build 2 Front!
Tire glue is
not included!
!
!
!
!
91101
KMC Hex
Wheel
(black)
91101
KMC Hex
Wheel
(black)
89413
1/8th molded
tire insert
89413
1/8th molded
tire insert
9809
SC10 Tire
w/foam
insert
JConcepts
#3042
JConcepts subculture
tire, green compound
(use on rear)
Note: Clean the rims and tire bead
where the two will mount to each other
before you glue them together. You
can clean them with either rubbing
alchohol, or r/c electric motor spray.
Place the foam insert inside the tire.
Install the tire on the rim, and push the
tire beads inside the groves on the rim.
Use Tire glue #1597 to glue the tire
to the wheel. Glue one side at a time,
allowing enough time for the glue to dry
before continuing to the other side.
Tip: You can use a rubber band to hold
the tire tight against the wheel while
the glue is drying.
The rear tires included in this
RTR are made by JConcepts.
JConcepts tires can be
purchased at their website:
http://www.jconcepts.net
1
32
I
O
6473
Shock
bushings
Rear
Shock
Build left and
right sides!
6472
Shock
mounting
nut
6925
4-40 x 1/2
shcs