Dynalab SMP40 - Manual (Page 32)

Set time: The devices displayed time can be set using the time keypad interface.
Set date: The devices displayed date can be set using the date keypad interface.
Save melt video: If the video files of the devices melt determinations do not need to be stored,
remove the check mark in this Toggle Selection field.
Use sounds for events: If sounds are not required for events that occur on the device, remove the
check mark in this Toggle Selection field.
Use sounds for screen touches: If a sound is not required to confirm each time the touch screen is
pressed, remove the check mark in this Toggle Selection field.
In the Settings and Calibration menu screen
touch the Change user settings section of the
screen.
1 The Change User Settings screen displays the
current status of all the user adjustable
instrument settings.
2 To adjust any of the displayed settings, touch
the individual settings control field and a new
setting can be entered by following the
control instructions on pages 11 and 12.
3 When the required adjustments have been
made press “Save these settings” on the
command toolbar to apply them.
30