Registers 200 and 201 – serial number, Register 202 – firmware version, Floating point format – NOVUS DigiRail-VA User Manual
Page 18

DigiRail-VA
NOVUS AUTOAMTION
18/19
REGISTERS 200 AND 201 – SERIAL NUMBER
They keep the serial number of the device. The two registers together form the serial number equipment, i.e., must be
treated as a 32-bit number.
REGISTER 202 – FIRMWARE VERSION
States the version of firmware of the device, as shown below:
If the version is “1.00” it will read the value as “100”. If the version is "2,04" it will read it as "204".
FLOATING POINT FORMAT
The DigiRail-VA uses floating point values of single precision (32 bits) according to the IEEE-754 standard (ANSI / IEEE
Standard for Binary Floating-Point Arithmetic).
See also other documents in the category NOVUS Sensors:
- N480D (6 pages)
- V1.5x A (103 pages)
- N1500FT Indicator (9 pages)
- TxBlock-USB Transmitter (4 pages)
- Controller N2000 (11 pages)
- Controller N2000 (9 pages)
- Controller N120 (14 pages)
- TxIsoLoop-1/TxIsoLoop-2 (2 pages)
- TagTemp-USB (5 pages)
- Controller N960 (6 pages)
- Controller N3000 (9 pages)
- Controller N3000 (11 pages)
- N1540 Process Indicator (5 pages)
- Controller N480D (6 pages)
- LogBox-DA (7 pages)
- N1040i Indicator (6 pages)
- N1040i Indicator (3 pages)
- N1020 (2 pages)
- N1020 (8 pages)
- DigiGate Profibus (11 pages)
- DigiGate Profibus (10 pages)
- N120/N125 CONTROLLER (13 pages)
- AirGate-Modbus (22 pages)
- RHT-Air (8 pages)
- Controller N1200 (13 pages)
- TxMiniBlock (2 pages)
- AirGate-GPRS (29 pages)
- DC80T (13 pages)
- RHT - WM (2 pages)
- Controller N1100 (11 pages)
- Controller N1100 (8 pages)
- superview (38 pages)
- RHT-WM-485-LCD (6 pages)
- TxIsoRail 4-20 mA (3 pages)
- N1540 Indicator (2 pages)
- TXRAIL0 - 10VDC (2 pages)
- TagTemp (7 pages)
- N323RHT (2 pages)
- RECIPE EDITOR (4 pages)
- TxIso Pack- HART (2 pages)
- n1500lc (14 pages)
- N2020 Controller (7 pages)
- N322T (2 pages)
- N321R (2 pages)