Stop, P1-01, P1-02 – Beijer Electronics BFI-P2 V1.21 User Manual
Page 27: P1-03, Managing the keypad
User Guide Revision 1.121
www.beijerelectronics.com
27
5. Managing the Keypad
The drive is configured and its operation monitored via the keypad and display.
5.1. Keypad Layout and Function – Standard LED Keypad
NAVIGATE
Used to display real‐time information, to access and exit
parameter edit mode and to store parameter changes
UP
Used to increase speed in real‐time mode or to increase
parameter values in parameter edit mode
DOWN
Used to decrease speed in real‐time mode or to decrease
parameter values in parameter edit mode
RESET /
STOP
Used to reset a tripped drive.
When in Keypad mode is used to Stop a running drive.
START
When in keypad mode, used to Start a stopped drive or to
reverse the direction of rotation if bi‐directional keypad
mode is enabled
5.2. Changing Parameters
Procedure
Display shows...
Power on Drive
Stop
Press and hold the
for >2 seconds
P1-01
Press the
Key
P1-02
The
and
can be used to select the desired parameter
P1-03
etc..
Select the required parameter, e.g. P1‐02
P1-02
Press the
button
0.0
Use
the
and keys to adjust the value, e.g. set to 10
10.0
Press the
key
P1-02
The parameter value is now adjusted and automatically stored. Press the
key for >2 seconds to return to
operating mode
Stop