Beijer Electronics BFI-P2 V1.21 User Manual
Page 17
User Guide Revision 1.121
www.beijerelectronics.com
17
3.9.2. Frame Size 4
3.9.3. Frame Size 5
Using a suitable flat blade
screwdriver, rotate the two
retaining screws indicated until the
screw slot is vertical.
Using a suitable flat blade
screwdriver, rotate the four
retaining screws indicated until
the screw slot is vertical.
Terminal Cover Release Screws
3.9.4. Frame Size 6 and 7
Remove the two screws indicated, lift the cover forwards and off. To refit the cover, slide the top locating lugs upwards under the top cover,
then re‐fasten the lower cover screws