Pulsafeeder Isochem RGT IOM - Manual (Page 34)

29
Appendix D – Options
POSITION 1 REGENERATIVE TURBINE MAGNETICALLY DRIVEN SEALLESS
RGT = C-FACE MOTOR MOUNTING ASSEMBLY. (1) – 10, 12
POSITION 2 PUMP SIZE 10 12
Port Size Inches FNPT/BSPT
Capacity MAX. GPM (M
3 /H)
Differential Head MAX. Ft. (M)
1.00”
14.5 (3.29)
427 (130)
1.00”
23.3 (5.29)
693 (211)
POSITION 3 AVAILABLE PUMP METAL AND TYPE PORT CONNECTION
A = 316SS FNPT
C = ALLOY C FNPT
K = 316SS FBSPT
M = ALLOY C FBSPT
X
X
X
X X
X
X
X
POSITION 4 IMPELLER AND SHAFT MATERIAL
A = 316SS
C = ALLOY C X
X X
X
POSITION 5 WEAR PLATE MATERIAL
L = Carbon
T = TFE (Glass Filled)
(2)
X
X X
X
POSITION 6 BEARING MATERIAL
K = Standard Carbon
L = Extended Life Carbon
T = TFE (Glass Filled)
(2)
X
X
X
X
X
X
POSITION 7 MAG DRIVE MOUNTING ARRANGEMENT
0 = 143TC– 184C FRAME (U.S.) (3)
R = 182-184TC FRAME (U.S.)
W = 213-215TC FRAME (U.S.)
K = 80 FRAME, (
∅ 100mm B.C. ) (Metric)
L = 90 FRAME, ( ∅ 115mm B.C. ) (Metric)
X
X
X
X
X
X
X
X
X
POSITION 8 OPTIONS
B = PFA Coated SS Hsg O-Rings, Metallic Bearing, Wearplate Lock Pins, and Spacer Shim
Assembly. (Required for temperatures above 200
° F (93 ° C)
X X
H = PFA Coated SS Hsg O-Rings / Metallic Bearing, Wearplate Lock Pins and Spacer Shim
Assembly. Samarium Cobalt Magnets (Required for temperatures above 300
° F (149 ° C)
X X
M = Alloy C Containment Can (For 316SS Construction Pumps) X X
S = Samarium Cobalt Magnet X X
W = Welded Driven Magnet Assy (Samarium Cobalt Magnets ONLY) X X
POSITION 9 OPTIONS
Consult your local representative for options to meet your special requirements.
Notes:
1.) All pumps require motors with feet..
2.) Only for temperatures below 110
°
F (43
°
C).
3.) Pedestal assembly A123208 with a foot-mounted motor is optional.
Use “O” in position 7 of the pump model number. Pedestal to be ordered as a separate line item.