Balboa Water Group HA350E - Manual (Page 2)

HA350E 0913
©2013 Balboa Water Group Inc. All rights reserved. Your Single Source Solution.
1382 Bell Avenue | Tustin, CA 92780 | p 714.384.0382 | f 714.384.0338
Specifications subject to change without notice.
ARTICLE
NO.
POWER
(P1)
V/HZ/A PNEUMATIC
(PRESENT FOR
ELEC. USE)
SELF
DRAIN
20-25821* 0.45kW 220-240V
/2.0A
X X
HA350E, 0.45kW
Performance Curve
* Available in bulk upon request 35-xxxxx.
Replace Article No. 20 with 35 before ordering.
20-25821
Self-drain
Pump Dimensions
Buttress Thread (2.50”)
O-Ring mounted on union
PUMP UNION WITH DISCHARGE TEE
92020M 2 X 32 mm I.D.
92020
2 x 1” I.D
92030 2 x 26 mm O.D
PUMP UNION, STRAIGHT
92015
50 mm I.D.
2614022 1 1/2” I.D.
Installation HA350E
STANDARD GLUE CONNECTION
Discharge Tee
20-0425 2 X 32 mm I.D. X 50 mm O.D.
FOR INSTALLATION
Mounting Plate for rubber feet
247012
There are different ways of installing the pump
1. The easy accessible rubber feet allow quick installation of the pump, by screwing 4 pcs. of M6 bolts
up into the nuts, that are integrated in the rubber feet.
2. Install the pump by adding the mouting plate (247012). The 10mm nut and pole makes installation
of the pumpe easy on the pump stand
3. Use the one point mounting slide for easy installation.