Xerox N3225 - Manual (Page 92)

Using the Finisher
3-34 ❖ User Guide
Using the Finisher
Features The finisher option has three output bins with a total
maximum capacity of 2,000 unstapled sheets, up to 667
unstapled sheets per bin. Stapled output can be sent to all
three bins.
Built-in Stapler
The stapler can staple sets of up to 50 sheets. It has three
stapling modes (Front for portrait, Back for landscape, and
Dual for booklet mode). The customer-replaceable
stapling unit contains 5,000 staples which are packaged as
a supply item, in sets of three, for a total of 15,000 staples
per package. The finisher comes with one staple cartridge
of 5,000 staples.
Capacity Handling
The finisher is programmed to ensure that there is enough
space remaining in the bin to output a job of from two to
50 pages. Up to 50 sheets can be stapled.
Stapled sets are kept in a compiler bin and ejected once a
complete set has been stapled. Output is delivered to the
finisher bins face down only.
The finisher has an elevator that positions one of the
three output bins to receive output from the compiler bin.
The finisher home position is when Bin 2 receives output
from the compiler bin. Finisher bin selection can be made
from printer drivers.