Xerox N3225 - Manual (Page 126)

Paper Jams
5-12 ❖ User Guide
Paper Jam
Clear Env Feeder
The printer cannot feed from the Envelope Feeder. Open the Envelope
Feeder and remove any jammed envelopes.
Paper Jam
Clear Tray 5
A paper jam has occurred in Tray 5. Open Tray 5 and remove jammed paper.
See“Clearing Paper Jams” (page 5-6) and “Clearing Tray 5” (page 5-22).
Remove Output
Finisher Bin 1
Finisher Bin 1 is full. Remove the output from Bin 1.
Remove Output
Finisher Bin 2
Finisher Bin 2 is full. Remove the output from Bin 2
Remove Output
Finisher Bin 3
Finisher Bin 3 is full. Remove the output from Bin 3
Remove Output
From Finisher
All three finisher bins are full. Remove the output from all three bins.
Slide In
Finisher
The finisher guide rail is not entirely in position. Slide the guide rail into
position. Make sure it is securely snapped into the console. Check to see that
the thumb screw that connects it to the finisher is hand tightened.
Stapl Fail Stapler Failure. Power OFF and ON the printer.
Stapl Fail H5-91
Power Off/On
The Staple Head did not return to its initial position. Power OFF and ON the
printer.
Table 5.1 Paper Jam Messages (continued)
Message Description/Corrective Action
Table 5.1 Page 6 of 7