Base printer with finisher/stapler option – Xerox N3225 User Manual
Page 159
FCC Notices...USA
Appendix B: Notices and Certifications
❖
B-3
Changes or modifications not specifically approved by the
manufacturer may void authority granted by the FCC to
operate the equipment.
Shielded cables must be used with this equipment to
maintain compliance with FCC regulations.
BASE PRINTER WITH TOKEN RING CARD OR
WITH 10BASE2 ETHERNET INTERFACE CARD
This printer has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules.
BASE PRINTER WITH FINISHER/STAPLER
OPTION
This printer has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules.
The FCC Class limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation.