Xerox N3225 - Manual (Page 77)

Using the Control Panel
Chapter 3: Printing ❖ 3-19
System Menu
(continued) Resolution Sets the default resolution for PCL and PostScript jobs.
Output Timeout Determines how many seconds the system will wait after a
bin is filled before directing output to an alternate bin.
Output Offset Enables or disables alternately offsetting output from jobs.
Output Dest Sets the default paper output destination for PCL and
PostScript jobs.
Staple Mode Selects the default staple position (when the Finisher is
installed.)
Print PS Errors Controls the use of the built-in PostScript error handler or
debugger.
Power Saver Defines a period of inactivity after which time the printer will
enter a low power state.
Config Legal/B4 Selects which of these sizes will be recognized by the tray
size switches.
Config Exec/B5 Selects which of these sizes will be recognized by the tray
size switches.
Defaults Sets the type of factory defaults to use when a “Factory
Default” is performed.
Table 3.6 Menu Options (continued)
Menu Description and Items
Table 3.6 Page 5 of 13