Print speed, Memory expansion, Print speed -10 – Xerox N3225 User Manual
Page 22: Memory expansion -10
Printer Features
1-10 ❖ User Guide
Print Speed
Print speed depends on the model/configuration of your
printer and the complexity of your print jobs. Maximum
rated print speed is either 32 ppm or 40 ppm.
Memory Expansion
The base printer contains 12 MB of Flash memory and 32
MB of DRAM installed as standard. There are three option
slots each supporting 16, 32, or 64 MB DRAM DIMMS or 8
MB Flash ROM DIMMs.
The maximum DRAM memory, both on-board and added
via DIMMs is 192 MB. Memory added beyond this limit is
ignored.
Additional memory provides the following enhanced
printer capabilities:
• Additional font cache
• Additional download space for fonts, macros and
images
• Increased throughput for complex pages, duplex pages
and larger paper sizes (A3/Ledger)
• Increased PostScript VM
• Collated sets without the Hard Disk Drive
You can essentially increase the resident fonts of the
printer or create resident macros by installing Flash
DIMMs and downloading resources permanently to this
memory.
Flash Memory DIMMs are installed in the same way as
DRAM DIMMs and in the same slots. Refer to the
instructions packed with the DIMMs or to Appendix C of
the System Administrator Guide on the CD-ROM.