Xerox N3225 - Manual (Page 142)

Solving Printing Problems
5-28 ❖ User Guide
PostScript commands
are printed instead of
the PostScript job. 1. Make certain that the software application you are using to create your job
is configured properly. Refer to your software documentation.
2. The job sent to the printer might have included an incorrect header, and
therefore not have indicated that a PostScript job was being sent.
- Check your software to make sure the PostScript header file is being sent
to the printer.
3. Set the Print PS Errors item in the System Menu to On and re-send the job.
- If an error page prints, there is a problem in the PostScript coding. Correct
the coding problem and re-send the job. Asking for features not available
can cause a configuration error.
- If the job still does not print and an error page was not printed, the job
may require additional memory.
Table 5.2 Printer operation problems
Problem Action
Table 5.2 Page 3 of 4