Sony MSAC-US30 - Manual (Page 87)

26-GB
3
Delete the driver if installed.
If you use the procedure described in Step 2 and confirm that [?
MSAC-US30] is shown under “Other devices” in the “View devices by
type” display, a separate device driver has already been installed.
Use the following procedure to delete this driver.
Do not delete other devices than [? MSAC-US30].
1 Right-click on [? MSAC-US30].
2 Click on [Remove]. The “Confirm Device Removal” screen
appears.
3 Click the [OK] button. The device is removed.
4 Restart your computer after disconnecting this unit from the
computer.
Install the device driver again by performing the procedure from
Step 1 described on page 15.
P Notes
• If you delete other devices than [? MSAC-US30], your computer may no
longer operate normally.
• You do not need to install “SonicStage” again if installation of
“SonicStage” has already been completed. Following completion of the
driver installation, restart your computer before you connect this unit to
the computer.
2
(Continued)
3 Click [View].
4 Click [View devices by type].
5 Double-click [Other devices].
6 Check whether [? MSAC-US30]
preceded by the “?” symbol is
shown.