Sony NAS-SV20i - Manual (Page 16)

16 GB
2
Connect the power cord to the AC
adaptor.
3
Connect the AC adaptor to the
unit, and then plug the power cord
into a wall outlet.
WARNING
DO NOT plug the power cord into a wall outlet
until other connections have been made.
Inserting batteries into
the remote control
Remove the battery compartment lid, and then
insert the supplied R6 (size AA) batteries (E end
first) matching the polarities as shown below.
When the remote control is no longer able to
operate the unit, replace both batteries with new
ones.
Using an iPod/iPhone
Insert a Dock Adapter into the iPod/iPhone dock.
When using an iPod model, use the dock adapter
supplied with your iPod.
When using an iPhone model, use one of the Dock
Adapters for iPhone models supplied with this
unit.
To remove the Dock Adapter for an iPhone model,
pull it up with your fingernail or a flat object using
the slot inside the adapter.
Power cord
AC adaptor
To the DC IN
19.5 V jack
Power cord
AC adaptor To a wall
outlet
A Dock Adapter for
an iPhone model
iPod/iPhone dock