Identifying parts and controls (lf-b10), Identifying parts and controls, Lf-b10) – Sony LF-B10 User Manual
Page 7: Front, Rear
Identifying Parts and Controls (LF-B10)
7
Identifying Parts and Controls
(LF-B10)
1 NETWORK LED
Indicates the connection status to a network.
Green blinking: Attempting to connect.
Green: Connected to the network. The LED blinks quickly when
data is transmitted.
Off: Not connected.
2 SETUP MODE/NET AV LED
Indicates the SETUP MODE status and the connection status with
the LocationFree device.
Green: Connected to the Base Station.
Amber blinking: The Base Station is in Setup mode.
Amber: Automatic NetAV check has failed.
Off: Not connected.
Red: The Base Station is being initialized.
3 SETUP MODE button
Press to register LocationFree devices.
4 POWER LED (
Green: The power is on.
Red: Attempting to be turned off.
Red blinking: A malfunction has occurred.
Off: The power is off.
5 POWER button (
Turns the Base Station power on and off.
6 RESET button (
Initializes all settings on the Base Station to the factory defaults.
7 Remote sensor for the learning remote feature (
When setting the on-screen remote control or using the learning
remote feature, this sensor receives signals from the remote of
devices.
8 IR BLASTER 1/2 port (
Connect the IR Blaster (supplied). You can purchase another IR
Blaster to connect to one of the ports.
9 LAN port (
Connect a LAN cable.
0 IN 1 (S-VIDEO/AUDIO/VIDEO) terminal (
Connect audio cables and either a video or S-video cable.
qa IN 2 (AUDIO/VIDEO) terminal (
Connect audio cables and a video cable.
qs DC IN jack (
Connect the AC power adapter (supplied).
qd OUT (S-VIDEO/AUDIO/VIDEO) terminal (
Connect audio cables and either a video or S-video cable. The OUT
terminal outputs the signals input from the IN 1 terminal.
Front
NETWORK
SETUP MODE/
NET AV
SETUP MODE
RESET
Rear
IR BLASTER
LAN
1
2
S VIDEO
IN 1
IN
OUT
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
VIDEO
DC IN 12V
AUDIO
L
R
IN 2
OUT