Sony LF-B10 - Manual (Page 14)

Se
tup a
nd Con
n
ec
tions
14
You can connect external devices featuring an A/V output terminal, such as a VCR, AV receiver, DVR,
DVD player/recorder, or digital cable, to the Base Station. Refer to the operating instructions for each
device.
Watching video with a connected
device
Open the [Index] window, select [Video 1] or
[Video 2] according to the input terminal to
which the device is connected.
z Tip
To operate external devices from the LocationFree
device, you must connect the supplied IR Blaster. For
details, see the next page.
Note
If you connect a DVD player to the Base Station via a
VCR, the VCR’s copy guard function may distort or
dim the DVD picture. Connect the DVD player
directly to the video input terminal on the Base Station.
Setup 2:
Connecting Other Devices
Connect external devices to the Base Station with an A/V cable
IR BLASTER
LAN
1 2
S VIDEO
IN 1
IN OUT
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
VIDEO
DC IN 12V
AUDIO
L
R
IN 2
OUT
IN 1
IN
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
IN 2
S VIDEO
OUT
VIDEO
AUDIO
L
R
OUT
S-video and A/V cable (not supplied)
If your VCR is not equipped with an S-video
jack, use a standard audio/video cable
(e.g., VMC-810S, not supplied).
Audio/video signal flow
or
You can also connect
to the IN 2 terminal.
The OUT terminal outputs the signal
input from the IN 1 terminal.
to the audio/video
output terminals
or
Base Station rear panel