Sony LF-B10 - Manual (Page 54)

W
a
tc
hi
ng Vid
e
o o
n
Lo
cati
onFree
Pla
y
e
r
14
When you selected [Preset]:
When you selected [Custom]:
You can configure each setting at will. If you
want to return to the settings at the time of
purchase, click [Standard].
2
Click [OK] or [Apply].
If you click [Apply], you can check the
current rate which is updated.
Notes
• When you change the rate, the connection between
the computer and the Base Station may be
disconnected and then reconnected in some
situation.
• The settings you make are only approximate point
values and the actual video rate may vary. Some
video content may make the video rate higher.
• When you connect to the Base Station LF-B1, some
feature will be disabled.
z
Tip
If you uncheck [AVC codec] box, the CPU load may be
reduced.
Adjusting the Volume
Turn the volume up or down using [+] and [-].
You can also move the bar to adjust the volume.
You can also adjust the volume by using the
LEFT (Vol -) and RIGHT (Vol +) ARROW keys.
z
Tip
If you cannot obtain the desired level when adjusting
the volume with the [+] and [-] volume buttons, adjust
the volume of the computer.
Another operation
Volume