Sony LF-B10 - Manual (Page 11)

Se
tup a
nd Con
n
ec
tions
11
3
Connect the power cord to the Base Station.
Notes
• Use only the supplied AC power adapter.
• Do not bundle the cord of the AC power adapter and
the antenna cable together. It may be degrade the TV
picture quality where the TV signal is weak.
4
Press the POWER button on the front panel
of the Base Station to turn it on.
The POWER LED on the front panel of the Base
Station lights green. Also, the SETUP MODE/
NET AV LED blinks green until an automatic
NetAV check begins.
5
(LF-B20 only) Check to see if the
WIRELESS LED lights green (2.4GHz) or
amber (5 GHz).
6
Check to see if the NETWORK LED lights
green.
If the NETWORK LED lights green, the
connection to the router is complete. Attach
the stand and connect to external devices,
and then setup the LocationFree Player.
Connecting a LocationFree device
to the Base Station wirelessly (LF-
B20 only)
If you want to connect your computer to the Base
Station wirelessly, set the wireless network
settings to communicate with the Base Station.
For more details, refer to the operating
instructions of your computer and your wireless
network devices.
IR BLASTER
LAN
1 2
S VIDEO
IN 1
IN OUT
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
VIDEO
DC IN 12V
AUDIO
L
R
IN 2
OUT
TO DC IN
Base Station rear panel
Wall outlet
Power cord
(supplied)
AC power adapter
(supplied)
Connect the power cord to the Base Station AC power
adapter, and the AC power adapter to the DC IN jack on
the Base Station, then plug the power cord into a wall
outlet.
WIRELESS
NETWORK
SETUP MODE
RESET
SETUP MODE/
NET AV
SETUP MODE/
NET AV
WIRELESS
NETWORK
SETUP MODE
RESET