Others, About self-diagnostics displays, Self-diagnostics led – Sony LF-B10 User Manual
Page 32
Oth
e
rs
32
Others
If an error occurs during use, the POWER LED on the front panel of the Base Station alerts you to the
problem. Refer to the following table for descriptions of problems and possible solutions. If the problem
persists, contact Sony LocationFree Customer Support.
Self-diagnostics LED
About Self-Diagnostics Displays
SETUP MODE/
NET AV
WIRELESS
NETWORK
SETUP MODE
RESET
POWER
LED
Base Station front
panel
POWER LED on the
Base Station
Problem
Causes and remedies
Blinks red
There may be a hardware malfunction
or a settings file error.
1
Turn the Base Station power off and then on
again.
2
Initialize the network and wireless settings
(
3
If the problem persists, contact Sony
LocationFree Customer Support.
This manual is related to the following products: