Agilent Technologies N-Series - Manual (Page 70)

Page 5-49 XTRAEDIT CONFIGURATION
XES # 4213 Tray(s) PCL5 #
0 HCF, 1, 2 5
1 1 (upper) 1
2 2 (lower) 3
3 HCF 5
4 1 1
5 1, 2 1
6 HCF, 2 5
7 HCF, 1 5
8 n/a 4
9 Bypass 2
A n/a 4
Executive, Folio, Legal, Ledger, A6, A5, A4, A3 and envelope sizes
Monarch, Com10, Intl DL, Intl C5 and Intl B5. Choose the paper size
appropriate for each tray. Each paper size designation is displayed with
its measurement.
Input Tray Map
The Input Tray Selection is used to match the XES input tray number (0-
A) to the PCL5 input tray number. For example:
The XES command for tray selection is sc#, where # is the input tray
number (0-A). The PCL5 command for tray selection is s&1#H, where #
is the input tray number. The following chart illustrates how tray
mapping could function if the user has replaced a Xerox 4213 printer
(running in XES mode) with a Xerox 4500 printer (running in PCL5
mode). The PCL5# is the value sent to the 4500 in the PCL5 source paper
drawer select command.
Output Tray Selection
The Output Tray Selection chooses the default output tray (1 or 2). The
default value is 1.
This option is equivalent to the XES Output Tray command.
Output Tray Map
The Output Tray Selection is used to match the XES output tray number
(1-2) to the PCL5 output tray number.