Agilent Technologies N-Series - Manual (Page 11)

SECTION 1
INTRODUCTION
General Information
The AGILE X/TRA XLi is an internal PDL translator that enables Xerox
DocuPrint ® N17, N24, N32 and N40 printers to accept data streams intended
for Xerox Escape Sequence (XES/UDK) printers.
The emulated printer is a Xerox 4213 Model II, firmware revision 2.1Y,
although some XES commands used by more advanced printers are also
supported.
The X/TRA XLi connects to the host via a standard Centronics printer
cable. Throughput for documents of above average complexity and no
graphics is rated at up to the rated printer speed of each particular model.
However, with documents of extreme complexity, actual throughput speeds
may vary.
Configuration of the X/TRA XLi is performed with a menu driven PC/MS
DOS program (XTRAEDIT). Nonvolatile storage preserves configuration
options and downloadable objects even when the power is disconnected
from the unit.
Features and Options
The X/TRA XLi is a fully functional XES to PCL PDL translator and is
available with several application-specific options.
Specifications
Printers Supported
▲
Xerox N17, N24, N32, N40
Port Specifications
Host Interface
▲
1 IEEE 1284C parallel input port
Throughput
▲
Rated printer speed up to 40 pages per minute
Resource Storage Space