Acnodes PCH 5120 - Manual (Page 72)

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PCH 5120
12.1” industrial Panel PC
IP67 rated fully enclosure
A. SAFETY PRECAUTIONS
WARNING:
The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions
may result in permanent damage to the PCH5120.
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
ƒ Follow the electrostatic precautions outlined below whenever the PCH5120 is opened.
ƒ Make sure the power is turned off and the power cord is disconnected whenever the
PCH5120 is being installed, moved or modified.
ƒ Do not apply voltage levels that exceed the specified voltage range. Doing so may cause fire
and/or an electrical shock.
ƒ Electric shocks can occur if the PCH5120 chassis is opened when the PCH5120 is running.
ƒ Do not drop or insert any objects into the ventilation openings of the PCH5120.
ƒ If considerable amounts of dust, water, or fluids enter the PCH5120, turn off the power supply
immediately, unplug the power cord, and contact the PCH5120 vendor.
ƒ DO NOT do the following:
o DO NOT drop the PCH5120 against a hard surface.
o DO NOT strike or exert excessive force onto the LCD panel.
o DO NOT touch any of the LCD panels with a sharp object
o DO NOT use the PCH5120 in a site where the ambient temperature exceeds the rated
temperature