Pch 512 0, 1 unpack the panel pc – Acnodes PCH 5120 User Manual
Page 14
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product descr
are subject to change without non,
please visit Acnodes’ web site at
PCH 512
12.1” industrial
IP67 rated fully
2.1 UNPACK THE PANEL PC
To unpack the flat panel PC, follow the steps below:
WARNING!
Only remove the protective plastic cover stuck to the front screen after instayer
protects the monitor surface during installation process.
Step 1: Carefully cut the tape sealing the box. Only cut deep enough to br
Step 2: Open the outside box.
Step 3: Carefully cut the tape sealing the box. Only cut deep enough to br
Step 4: Open the inside box.
Step 5: Lift the monitor out of the boxes.
Step 6: Remove the peripheral parts box from the main box.
2.2 PACKING LIST
1 x PCH5120/PCH5121
1 x Power Cable
6 x Connector Cap
1 x Panel mounting screws
1 x Touch Screen Pen
These optional items are also available.
1 x USB Cable
1 x Audio Cable
1 x LAN cable
1 x Power Adapt
1 x Serial port cable
1 x CAN bus cable