Pch 5120, 2 ide configuration – Acnodes PCH 5120 User Manual
Page 37
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PCH 5120
12.1” industrial Panel PC
IP67 rated fully enclosure
5.3.2 IDE CONFIGURATION
Use the IDE Configuration menu (BIOS Menu 4) to change and/or set the configuration of the IDE devices
installed in the system.
ƒ
ATA/IDE Configuration [Compatible]
Use the ATA/IDE Configuration option to configure the ATA/IDE controller.
Disabled
Disables the on-board ATA/IDE controller.
Compatible DEFAULT
The SATA drive is configured on an IDE channel.
Enhanced
Both IDE and SATA channels are configured separately.
ƒ
Legacy IDE Channels [SATA Pri, PATA Sec]
Use the Legacy IDE Channels option to configure SATA devices as normal IDE devices.
SATA Only
Only SATA drives are on the IDE channels. IDE drives are disabled
SATA Pri,
PATA Sec DEFAULT
SATA drives are configured on the Primary IDE channel. IDE drives on the
Secondary IDE channel