Pch 5120 – Acnodes PCH 5120 User Manual

Page 27

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

PCH 5120

12.1” industrial Panel PC

IP67 rated fully enclosure

Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

cable RJ-45 connector into the onboard RJ-45 port.

3.7.3 SERIAL DEVICE CABLE

The serial device connectors are for connecting serial devices. Follow the steps below to connect a serial

device to the panel PC.

Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in Chapter 2.

Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into the DB-9 connector on

the bottom panel. See Figure 3-14.