Karcher HKF 200 K2 - Manual (Page 37)

- 17
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
5.957-799
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2011/11/01
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
Troubleshooting
Fault Possible cause Remedy of whom
Motor does not turn. No compressed air present or
pressure too low. Check compressed air supply. Operator
Compressed air supply line
kinked. Check compressed air hoses. Operator
Motor does not turn, clean-
ing head does not turn Overload fuse has been activat-
ed. Remove both fastening screws of the com-
pressed air motor, pull the compressed air mo-
tor out with the connecting shaft, pull the
connecting shaft out of the coupling, replace the
nominal breakage fitting key, reinstall the con-
necting shaft and the motor. Operator
Mechanical defect on:
– Coupling parts
– Drive shaft
– Gears
Check parts and replace defective parts. Customer Service
Cleaning head turns too
abruptly Worn drive discs cause increased
bevel play. Replace drive discs. Customer Service
Destroyed gears on bevel wheels. Replace bevel wheels. Customer Service
Uneven cleaning jet Spray nozzles clogged. Clean spray nozzles. Operator
Spray nozzles damaged. Replace spray nozzles. Operator
EC Declaration of Conformity
Product: Internal cleaner
Type: HKF 200 K2 SO
Type: HKF 200 K2 SR
Relevant EU Directives
2006/42/EC (+2009/127/EC)
94/9/EC
Applied harmonized standards
EN ISO 12100
EN 1127-1: 2007
EN 13463-1: 2009
EN 13463-5: 2003
Applied national standards
BGR 132: 2003
ID no. of notified body
0123
Test report no.
70091672
Marking
II 1/2 G c T4
CEO Head of Approbation
Warranty
37 EN