HID Palo Alto Networks and ActivID AS - Manual (Page 17)

ActivID Appliance RADIUS and Palo Alto Networks Integration | RADIUS Channel Integration Handbook
External Release | © 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved. Page | 17
3.0 ActivID Appliance Configuration: Sequence of Procedures
This chapter describes the procedures required to configure ActivID Appliance support for an RFE component
installed on an appliance.
You will perform these steps using the ActivID Management Console. Be sure you have the ActivID Appliance
Management Console Admin Guide technical publication on hand. This chapter does not provide all the details.
3.1 Configure RADIUS Channel
A RADIUS channel for the RFE deployment defines a group of access controllers and specifies how to handle
authentication requests.
Using a policy configured for the channel, you will filter the requests according to the IP address or hostname of
the access controllers.
1. Launch the ActivID Management Console.