HID Juniper and ActivID AS OOB - Manual (Page 7)

4TRESS FT2011 Out-of-Band Authentication and Juniper Secure Access | RADIUS Channel Integration Handbook
External Release | © 2012-2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved. Page | 7
5. In the Finding user entries section, specify a Base DN from which to begin searching for user entries, and
make sure that the Filter is correct (for example: samaccountname=).
6. At the bottom of the dialog, click Save Changes (not illustrated).
2.2 Procedure 2: Create New RADIUS Authentication Server
When using an external RADIUS server to authenticate Juniper SA users, you must configure the server to
recognize the Juniper SA as a client and specify a shared secret for the RADIUS server to use to authenticate the
client request. To configure a connection to the RADIUS server on an SA Series SSL VPN appliance, perform the
following steps.
Getting Started
1. In the Admin
console, expand the
Authentication
menu, and then
click Auth. Servers.
2. From the New drop-down list, select Radius Server,
and then click New Server.
The following dialog is displayed.