HID Juniper and ActivID AS OOB - Manual (Page 17)

4TRESS FT2011 Out-of-Band Authentication and Juniper Secure Access | RADIUS Channel Integration Handbook
External Release | © 2012-2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved. Page | 17
4. For Sign-in Page, select the sign-in page that you want to associate with the policy.
5. For Authentication realm, specify which realm(s) map to the policy, and how users should pick from
amongst realms.
6. Click Save Changes.
3.0 4TRESS AS Configuration
This chapter describes the procedures required to configure 4TRESS Authentication Appliance support for a
RADIUS Front End (RFE) component installed on an Appliance.
You will perform these steps using the 4TRESS Management Console. Be sure you have the ActivIdentity
4TRESS Authentication Appliance Administration Guide: Management Console technical publication on hand.
This chapter does not provide all the details.
3.1 Configure RADIUS Channel
A RADIUS channel for the RFE deployment defines a group of access controllers and specifies how to handle
authentication requests.
Using a policy configured for the channel, you will filter the requests according to the IP address or hostname of
the access controllers.
1. Launch the 4TRESS Management Console.
2. When prompted, enter your User name and Password, and then click Submit.