Nikon 5700 - Manual (Page 80)

Taking Pictur
es : The Details—Choosing a User Set
68
The Button ( 130)
By default, the button can be used to choose a User Set without access-
ing the camera menus. Press the button while rotating the command dial,
the selected User Set will appear in the control panel while the button is
pressed.
By default the camera is set to User Set A, where the camera controls the ma-
jority of camera settings. If you set the camera to User Set 1, 2, or 3, you can
change default settings to suit your needs. Settings that can be altered in User
Sets 1, 2 and 3 are as follows:
Choosing a User Set
SHOOTING menu settings for User Sets 1, 2, and 3 are stored separately. If there
is a particular combination of settings you use frequently, you can select User
Set 1 and set the camera to those settings. The camera will “remember” your
settings even when turned off, and will automatically restore these settings the
next time User Set 1 is selected. You can create further combinations of set-
tings for User Sets 2 and 3, and switch instantly from one combination of set-
tings to the other simply by selecting the desired User Set.
Settings for the following menu items are stored separately in each User Set.
The menu icons for these settings (step 3, next page) will turn red when set
to something other than the default setting.
Setting
70 Exposure Mode
78 Sensitivity (ISO)
80 Manual Focus
100 Shooting Menu Settings
Setting
101 White Balance
103 Metering
104 Continuous
Setting
107 Image Adjustment
108 Saturation Control
109 Lens
106 BSS 114 Image Sharpening