Nikon 5700 - Manual (Page 127)

Menu Guide—Using the SHOOTING Menu
115
On
Select On and choose the desired option from the
menu options shown below. Exposure is bracketed
around the exposure compensation value selected with
the
button ( 66).
Varying Settings Automatically: Auto Bracketing
At times, you may find it difficult to select appropri-
ate exposure compensation and white balance set-
tings, and yet not have time to check the results and
adjust settings after each shot. Auto Bracketing can
be used to vary these settings automatically over a
series of shots, “bracketing” a selected exposure com-
pensation or white balance setting.
5 5, ±1.0 ±1 EV 0, +2.0, +1.0, –1.0, –2.0
5 5, ±0.7 ± 2 /
3
EV 0, +1.3, +0.7, –0.7, –1.3
5 5, ±0.3 ± 1 /
3
EV 0, +0.7, +0.3, –0.3, –0.7
3 3, ±1.0 ±1 EV 0, +1.0, –1.0
3 3, ±0.7 ± 2 /
3
EV 0, +0.7, –0.7
3 3, ±0.3 ± 1 /
3
EV 0, +0.3, –0.3
No. of shots Option Exposure increment Bracketing order
Notes on Autoexposure Bracketing
• Autoexposure bracketing restarts from positive EV values when changes
are made to any exposure setting (exposure mode, exposure compensa-
tion, shutter speed, aperture, sensitivity, flash mode, and Variable Power).
• If the shutter-release button is held down at settings of Continuous Low
or Continuous High ( 104), shooting will pause after completing each
bracketing cycle. At Continuous High, only three shots will be taken.
• Bracketing is automatically cancelled when the camera is turned off, or set
to User Set A.