Avaya INDeX 2030 - Manual (Page 27)

Setting Up a DSS Key DSS Keys – Page 27
DSS Keys
Setting Up a DSS Key
Phones have eight DSS keys along their right-hand edge. Each can store a line,
extension or group number. DSS keys allow you to dial numbers in a single key
stroke and perform actions such as Pickup, Unpark, etc.
You can also use DSS keys to dial personal speed dial numbers (see page 11). In
addition, certain network environments may allow you to program remote extensions
under DSS keys. Consult your System Manager for details.
To set a DSS/BLF key directory number:
1. Press PROGRAM and then the DSS key to use.
2. Enter your passcode (see page 40).
3. The display shows the current stored number (if set).
4. Press CANCEL and dial the number to store.
5. Select another DSS key or press DONE
and PROGRAM to finish.
Using DSS Keys
Once setup, you can use the DSS key for the following actions. You can also use
DSS keys to dial personal speed dial numbers (see page 11).
To make internal calls:
Press the DSS key storing the extension or group number.
To make external calls:
Press the DSS key storing the line or line group number, then dial the external
number.
To pickup calls:
Press the DSS key storing the ringing extension number (fast flashing red BLF
lamp).
To unpark calls:
Press the DSS key storing the parked line number (slow flashing green or red BLF
lamp).
To make a page call:
Press PAGE and then the DSS key storing the extension or group number.
INDeX 10.0 2030/50/60 User's Guide DSS Keys – Page 27
38DHB0002UKFN Issue 2 (07/2002) Setting Up a DSS Key