Alliance Laundry Systems UW35AV - Manual (Page 31)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Specifications and Dimensions
29 F232228
Steam Requirements
(Steam Heat Option Only) For washer-extractors equipped with optional steam
heat, install piping in accordance with approved
commercial steam practices. Steam requirements are
shown in Table 8.
NOTE: Failure to install the supplied steam filter
may void the warranty.
Table 8
Never touch internal or external steam
pipes, connections, or components.
These surfaces can be extremely hot and
will cause severe burns. The steam must
be turned off and the pipe, connections,
and components allowed to cool before
the pipe can be touched.
SW014
WARNING
UWAV Pocket Hardmount
Steam Supply Information
Specifications 35 60 80 100 125
Steam inlet connection, in (mm) 0.5 (DN13) 0.5 (DN13) 0.5 (DN13) 0.5 (DN13) 0.75 (DN19)
Number of steam inlets 1 1 1 1 1
Recommended pressure, psi (bar) 30 – 80
(2.0 – 5.5)
30 – 80
(2.0 – 5.5)
30 – 80
(2.0 – 5.5)
30 – 80
(2.0 – 5.5)
30 – 80
(2.0 – 5.5)
Maximum pressure, psi (bar) 80 (5.5) 80 (5.5) 80 (5.5) 80 (5.5) 80 (5.5)