Blodgett SC-E Series - Manual (Page 6)

4 OM-SC-E
Your Atmospheric Convection Steamer is designed to give years of service. It has two
stainless steel cavities (cooking chambers) which are served by twin, independent
atmospheric steam generators which are electrically-heated. A powerful blower
circulates the steam in each cavity, to increase heating efficiency.
Each cavity holds up to three steam table pans (12”x 20” x 2½”). A 18 gauge stainless
steel cabinet encloses the cavities, the steam generators and the control compartment
that houses electrical components. Door hinges are reversible (the doors may be set to
open from the left or right). Operating Controls are on the front panel.
Steamers are equipped with fully electronic controls and a button-activated, pre-
programmed CLEAN cycle. The On-Off switch is a touch pad control, and the
distinctive symbol for steam is integrated into the panel design.
The drain system includes a spray condenser, which reduces condensate temperature
and helps keep steam from escaping through the drain.
Equipment Description
WARNING
BEFORE REMOVING ANY PARTITION OR
PANEL, TURN OFF THE ELECTRICAL POWER
AND LET THE FAN STOP ROTATING.
BEFORE WORKING ON ANY ELECTRICAL
COMPONENT, DISCONNECT THE POWER
SOURCE FROM THE UNIT.
WARNING
THE UNIT MUST BE INSTALLED BY
PERSONNEL WHO ARE QUALIFIED TO
WORK WITH ELECTRICITY AND PLUMBING.
IMPROPER INSTALLATION CAN CAUSE
INJURY TO PERSONNEL AND/OR DAMAGE TO
THE EQUIPMENT. THE UNIT MUST BE
INSTALLED IN ACCORDANCE WITH
APPLICABLE CODES.
The steamer has two independent cavities, each
with its own base-mounted steam generator.