beautypg.com

Installing the powerblade pbc18 in a rack – Allied Telesis AT-PBC18 User Manual

Page 24

background image

14

Installing the PowerBlade PBC18 in a Rack

The chassis can be installed in a 19-, 23-, or 25-inch rack. It is recommended
that you install the chassis in the rack before installing the PowerBlade
modules.

For rackmount installation, perform the following procedure:

1.

Remove the rubber feet from the bottom of the chassis, if attached, as
shown in Figure 10.

Figure 10 Removing the Rubber Feet

2.

Attach the brackets to either the front or middle of the side of the chassis,
as shown in Figure 11.

Figure 11 Attaching the Brackets to the PowerBlade PBC18

19-inch Bracket

19-inch Bracket

23- and 25-inch

Installation A

Installation B

23- and 25-inch Bracket
Installation B

Bracket Installation A