Allied Telesis AT-MR908TX - Manual (Page 46)

AT-MR908TX Specifications
26
Low chipset latency delay for:
❑ Cascade uplink through one RJ-45 port with MDI/MDI-X crossover
switch
❑ Stackable backplane expansion
Front-panel LEDS for performance monitoring or failure diagnostics:
❑ 1 system status LED
— Power On/Off
— Collision detection
❑ 5 network status LEDs for utilization display without management
software
❑ 8 Link/Activity and Error LEDs, one for each RJ-45 port
Back-panel connectors:
❑ 8 shielded RJ-45 connectors
❑ Cascade port and MDI/MDI-X slide switch
❑ Power supply receptacle
❑ Optional In/Out port for stackable hubs
Partitioning: Auto-partitioning on ports with excessive collision
Cabling Specifications
❑ Type - STP/UTP Category 5 wiring, 100 ohm impedance
❑ Length - 5 meters between hubs; 100 meters between hub and network
node
Power: Internal universal power adapter supplying 100 to 240 VAC, 50/60 Hz.