Allied Telesis AT-MR908TX - Manual (Page 22)

Product Description
2
Features
AT-MR908TX Standalone/Stackable hubs incorporate the following features:
❑ Compliance with IEEE 802.3u 100Mbps repeater specification
❑ Class I and II compliance
❑ Eight 100BASE-TX ports for Fast Ethernet connectivity
❑ Metal chassis for either desktop or 19-inch rackmount installation
❑ Internal fan and two side-vents support 0-50 0 C (32-122 0 F) degrees of
temperature
❑ Unshielded/Shielded (UTP/STP) Twisted Pair cabling (Category 5)
— Up to 5 meters maximum for each hub-to-hub connection
— Up to 100 meters maximum for each hub-to-workstation connection
❑ A MDI/MDI-X slide switch for ease of cascading
❑ Auto-partitioning of ports that receive excessive collisions
❑ Full compatibility with other ATI 100MB products
❑ Stackability (AT-MR908TX-19A, AT-MR908TX-29A, AT-MR908TX-
39A only)
Package Contents
The parts included with each AT-MR908TX hub are listed below. Please check
the equipment you received to make sure you have everything.
❑ 100BASE-TX Fast Ethernet hub with 8 shielded RJ45 ports
❑ Power cord
❑ Warranty card
❑ This installation manual
❑ AT-MR901 stacking module, AT-MR901 stacking module cable
(SCSI II), stacking brackets (AT-MR908TX-19A, AT-MR908TX-29A,
AT-MR908TX-39A only)
Note
If any item listed above is missing, please notify your ATI sales
representative.