beautypg.com

Remove all equipment from the packing box and s, Insert the female end of the power cord into th, Insert the male end of the power cord into an e – Allied Telesis AT-MR908TX User Manual

Page 31: Check the front panel of the hub to make sure t, Plug all 100base-tx cables into the 100base-tx, Figure6: standalone at-mr908tx back panel, Ensure that the mdi /mdi-x slide switch is set, Plug the opposite end of each 100base-tx cable

Remove all equipment from the packing box and s, Insert the female end of the power cord into th, Insert the male end of the power cord into an e | Check the front panel of the hub to make sure t, Plug all 100base-tx cables into the 100base-tx, Figure6: standalone at-mr908tx back panel, Ensure that the mdi /mdi-x slide switch is set, Plug the opposite end of each 100base-tx cable | Allied Telesis AT-MR908TX User Manual | Page 31 / 62 Remove all equipment from the packing box and s, Insert the female end of the power cord into th, Insert the male end of the power cord into an e | Check the front panel of the hub to make sure t, Plug all 100base-tx cables into the 100base-tx, Figure6: standalone at-mr908tx back panel, Ensure that the mdi /mdi-x slide switch is set, Plug the opposite end of each 100base-tx cable | Allied Telesis AT-MR908TX User Manual | Page 31 / 62