Allied Telesis AT-S63 - Manual (Page 660)

Chapter 36: Management Access Control List
660 Section IX: Management Security
Modifying an ACE
To modify an ACE, you need to know its identification number. To view the
identification numbers of the ACEs, refer to “Displaying the ACEs” on
page 663.
To modify an ACE, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 1 on page 32.
2. From the System Administration menu, type 7 to select Management
ACL.
The Management ACL Configuration menu is shown in Figure 236 on
page 656.
3. From the Management ACL Configuration menu, type 3 to select
Modify Management ACL Entry.
The following prompt is displayed:
Enter the entry ID : [1 to 256] -> 1
4. Enter the identification number of the ACE you want to modify. You
can modify one ACE at a time.
The specifications of the selected ACE are displayed in the Modify
Management ACL Entry window. An example of the window is shown
in Figure 237.
Figure 237. Modify Management ACL Entry
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Modify Management ACL Entry
Configuring Management ACL
1 - ID .......................... 11
2 - IP Address .................. 149.44.44.44
3 - Network Mask ................ 255.255.255.255
4 - Application(s) .............. Telnet,Ping
M - Modify Management ACL Entry
R - Return to Previous Menu
Enter your selection?