Allied Telesis AT-S63 - Manual (Page 240)

Chapter 13: Access Control Lists
240 Section II: Advanced Operations
9. Type 5 to select Port List and, when prompted, enter the ports where
you want to assign the ACL. You can assign an ACL to just one port or
to more than one port. When entering multiple ports, you can list the
ports individually (e.g., 2,5,7), as a range (e.g., 8-12) or both (e.g., 1-
4,6,8).
10. Type C to select Create ACL.
The ACL is created on the switch and immediately activated on the
specified ports.
11. To create additional ACLs, repeat this procedure starting with step 3.
12. To permanently save your change, return to the Main Menu and type S
to select Save Configuration Changes.