Allied Telesis AT-S63 - Manual (Page 265)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 265
5. To display the specifics of a flow group, type D to select Display Flow
Group Details.
The following prompt is displayed:
Available Flow Group(s): 0-10
Enter Flow Group ID : [0 to 1023] -> 0
6. Enter the ID number of the flow group you want to view. You can
display only one flow group at a time.
The specifications of the selected flow group are displayed in the
Display Flow Group Details menu. An example is shown in Figure 95.
Figure 95. Display Flow Group Detail Menu
The Display Flow Group Details menu provides the following
information:
Flow Group ID
The flow group’s ID number.
Description
The flow group’s description.
DSCP value
The replacement value to write into the DSCP (TOS) field of the
packets.
Priority
The new user priority value for the packets.
Remark Priority
Replaces the user priority value in the packets with the Priority value.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display Flow Group Details
1 - Flow Group ID .............. 2
2 - Description ................ Video1
3 - DSCP value ................. 0
4 - Priority ................... 6
5 - Remark Priority ............ No
6 - ToS ........................
7 - Move ToS to Priority ....... No
8 - Move Priority to ToS ....... No
9 - Classifier List ............ 11
U - Update Display
R - Return to Previous Menu
Enter your selection?