Allied Telesis AT-S63 - Manual (Page 489)

AT-S63 Management Software Menus Interface User’s Guide
Section VI: Virtual LANs 489
Deleting a Port-based or Tagged VLAN
This procedure deletes port-based and tagged VLANs from the switch.
Note the following before performing this procedure:
ˆ You cannot delete the Default_VLAN.
ˆ You cannot delete a VLAN if it has a routing interface. The interface
must be deleted first. For instructions, refer to “Deleting a Routing
Interface” on page 556.
ˆ All untagged ports in a deleted VLAN are returned to the
Default_VLAN as untagged ports.
ˆ Static addresses assigned to the ports of a deleted VLAN become
obsolete and should be deleted from the MAC address table. For
instructions, refer to “Deleting Unicast and Multicast MAC Addresses”
on page 112.
Note
To delete a VLAN, you need to know its VID. To view VLAN VIDs,
refer to “Displaying VLANs” on page 487.
To delete a VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
The VLAN Configuration menu is shown in Figure 163 on page 474.
2. From the VLAN Configuration menu, type 3 to select Configure
VLANs.
The Configure VLANs menu is shown in Figure 164 on page 475.
3. From the Configure VLANs menu, type 3 to select Delete VLAN.
The Delete VLAN menu is shown in Figure 169.
Figure 169. Delete VLAN Menu
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Delete VLAN
1 - VLAN ID (VID) ........
R - Return to Previous Menu
Enter your selection?