Allied Telesis AT-S63 - Manual (Page 264)

Chapter 15: Quality of Service
264 Section II: Advanced Operations
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 89 on page 258.
3. From the Quality of Service (QoS) menu, type 1 to select Flow Group
Configuration.
The Flow Group Configuration menu is shown in Figure 90 on page
259.
4. From the Flow Group Configuration menu, type 4 to select Show Flow
Groups.
The Show Flow Groups menu is shown in Figure 94.
Figure 94. Show Flow Groups Menu
The Show Flow Groups menu provides the following information:
ID
The flow group’s ID number.
Description
A description of the flow group.
Parent Traffic Class ID
The ID number of the traffic class to which the flow group is assigned.
A flow group can belong to only one traffic class at a time.
Active
The status of the flow group. If the flow group is part of a QoS policy
that is assigned to one or more ports, the flow group is deemed active.
If the flow group has not been assigned to a policy or if the policy has
not been assigned to any ports, the flow group is deemed inactive.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Show Flow Groups
Number of Flow Groups: 5
Parent
ID Description Traffic Class ID Active
------------------------------------------------------------
0
Dev database 22 Yes
1 Inv database 5 No
2 Video1 14 Yes
3 Video2 2 Yes
4 Demo dev 1 Yes
D - Display Flow Group Details
U - Update Display
R - Return to Previous Menu
Enter your selection?