Allied Telesis AT-S63 - Manual (Page 586)

Chapter 30: 802.1x Port-based Network Access Control
586 Section VIII: Port Security
Configuring RADIUS Accounting
The AT-S63 Management Software supports RADIUS accounting for
ports operating in the Authenticator role. The accounting information sent
by the switch to a RADIUS server includes the date and time when clients
log on and log off, as well as the number of packets sent and received by
a switch port during a client session. The default setting for this feature on
the switch is disabled.
To configure this feature, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 71 on page 226.
2. From the Security and Services menu, type 2 to select Port Access
Control (802.1X).
The Port Access Control (802.1X) menu is shown in Figure 203 on
page 572.
3. From the Port Access Control (802.1X) menu, type 7 to select
Configure Accounting.
The RADIUS Accounting menu is shown in Figure 210.
Figure 210. Radius Accounting Menu
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
RADIUS Accounting
1 - Status............ Disabled
2 - Port.............. 1813
3 - Type.............. Network
4 - Trigger Type...... Start_Stop
5 - Update Status..... Disabled
6 - Update Interval... 60
R - Return to Previous Menu
Enter your selection?