Allied Telesis AT-MCR1 - Manual (Page 20)

Chapter 2: Installation
20
Verifying the Package Contents
Make sure the following items are included in your package. If any
item is missing or damaged, contact your Allied Telesis sales
representative for assistance.
ˆ One AT-MCR1 Media Converter Chassis with a mounting
rail installed
ˆ Four protective rubber feet (for desktop use only)
ˆ Two mounting brackets
ˆ Eight bracket-mounting screws (M3X6)
ˆ Four wall-mount plastic anchors (No. 6-10, 7/8 inch)
ˆ Four self-tapping screws (3.5mm X 20mm)
ˆ One retaining clip (AC model only)
ˆ This installation guide
ˆ Warranty card
Items needed for installation but not provided by Allied Telesis:
ˆ Phillips screw driver
ˆ Mounting screws for under-table installation