Allied Telesis AT-MCR1 - Manual (Page 16)

Chapter 2: Installation
16
Reviewing Safety Precautions
Review the following safety precautions before you begin to install
the AT-MCR1 chassis.
Note
The indicates that a translation of the safety statement is
available in a PDF document titled “Translated Safety
Statements” on the Allied Telesis website at
www.alliedtelesis.com.
Warning: Class 1 Laser product. L 1
Warning: Do not work on equipment or cables during
periods of lightning activity.
E2
Warning: Power cord is used as a disconnection
device. To de-energize equipment, disconnect the
power cord.
E3
Warning: Class I Equipment. This equipment must be
earthed. The power plug must be connected to a
properly wired earth ground socket outlet. An
improperly wired socket outlet could place hazardous
voltages on accessible metal parts.
E4
Pluggable Equipment. The socket outlet shall be
installed near the equipment and shall be easily
accessible.
E5