Allied Telesis AT-iMG646PX-ON - Manual (Page 73)

AT-iMG646xx Series Intelligent Multiservice Gateway and AT-EN646 Enclosure Installation Guide
Section II: Indoor Installation 73
Preparing for the Installation
To prepare for the installation, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Ensure that the following components are included in the gateway
package. If any item is missing or damaged, contact your Allied Telesis
sales representative for assistance.
ˆ An AT-iMG646xx series intelligent multiservice gateway
ˆ Accessory kit that contains:
- Four long self-tapping pan head Phillips screws
- Four short pan head machine screws
- Four wood screws
- Four plastic wall anchors
- One10-32 x 1-inch stud that has one small split washer, one
regular washer, and two Kepnuts on it
- One ring lug
- One DC terminal block
ˆ This installation guide