Allied Telesis AT-iMG646PX-ON - Manual (Page 45)

AT-iMG646xx Series Intelligent Multiservice Gateway and AT-EN646 Enclosure Installation Guide
Section I: Outdoor Installation 45
3. Insert a small clear wire tie through the holes in the left upper and
lower mounting tabs on the bottom portion, as shown in Figure 20.
Figure 20. Inserting the Wire Ties
4. Route the buffer tube from the drop cable to the lower left corner of the
splice tray and secure the tube to the splice tray with the wire tie, as
shown in Figure 21.
Figure 21. Securing the Buffer Tube
850
851